Home  Favorites  Contact



GHL Series High Speed Mixing Granulator

Main Introduction:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material. Then it is cut through high-speed crusher and become uniform granules.
  • The machine adapts horizontal cylinder structure. Its structure is reasonable.
  • Use air filled seal shaft to drive. When washing, it can be changed to water.
  • Use fluidization to Granulate and the granule is near ball. Its flow is good;
  • Compared the traditional process, 25% of adhesive can be reduced and the laying time can be shorted;
  • The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes. Compared with the traditional process, 4-5 times of efficiency is raised;
  • In the same sealed container, dry mixing, humidity mixing and granulating can be finished. It is in conformity with the requirements of GMP.
  • The whole operation has strict safe and protective measures.
Technical Parameters



Shanghai Develop Machinery Co., Limited, Tel:+86-21-56080969 Fax:86-21-51062082 Email: sales@sdmpm.com